Bentley Coffee Corner: STAAD - Generating Static Seismic Loads in the STAAD.Pro Physical Modeler

In this webinar, Sabrina Tedeschi, Bentley Systems Senior Application Engineer, will generate static seismic loads in the STAAD.Pro Physical Modeler according to the IBC/ ASCE 7 equivalent lateral force procedures.

Register for free to Bentley Coffee Corner

Key learning points will include:

• Defining the seismic mass in a load group.
• Creating the seismic load definition.
• Applying the static seismic loads to the structure.
• Understanding when a multi-run analysis will be required.

Bentley Coffee Corners are open to all Bentley users, free of charge. One learning unit is applied to each participant’s Bentley Transcript for self-reporting. To view prior sessions, watch the Recordings On-Demand.

**The webcast will be streamed through your computer, so there is no dial-in number.  Please make sure your computer speakers (or headset) are turned on and the volume is set to an audible level so you can hear the presenters.