The International Information Center for Structural Engineers

Friday, 09 May 2014 13:43cat

Rion-Antirrion Bridge

Written by  TheStructuralEngineer.info
Rate this item
(0 votes)

Rion-Antirrion Bridge: Views of the piers, in the dry dock, floating, in place and of their interior

Photos taken in October 2001

Photos provided by G. Konstantakopoulos, N. Stathopoulos, J. Simeonoglou.

Texts by G. Konstantakopoulos 

Figure 1: View of the bridge pier, currently under construction, that is currently floating near the coast. Access to the pier is through the ship illustrated in the figure. The ship is modified to allow transportation of the reinforcements using trucks. 

 

Figure 2: Another pier of the bridge. 

Figure 3: Reinforcement placement in the pier, according to the design. The reinforcement has previously being transported with a truck next to the pier. 

Figure 4: Interior of the pier of Figure 6. The thickness of the reinforced wall is approximately 2.0m.

Figure 5: Interior of the pier. Detail of the pier wall.

Figure 6: View of the piers that are under construction close to the coasts. The right one is the one illustrated in Figure 4 and 5.

Figure 7: View of a pier that has currently touched the bottom of the sea.

Figure 8: Footing of a pier, currently under construction, in the dry dock.

Figure 9: Footing of a pier, currently under construction, in the dry dock. 

 
Read 2639 times

The StructuralEngineer.info News Center is being funded by our Annual Corporate Sponsors " (learn more):

Leave a comment

Make sure you enter the (*) required information where indicated. HTML code is not allowed.