The International Information Center for Structural Engineers

A single point with mass m is vibrating harmonically. The displacement x from point of balance is governed by the differential equation

Wednesday, 02 May 2018 20:06

Calculation Example – Critical load. Featured

A solid rod has a diameter of 20 mm and is 600 mm long. It is made of a material that can be modeled by the stress–strain diagram shown in the figure below. If it is used as a pin-supported column, determine the critical load.

Determine the minimum diameter of the rod. The axial tensile force is P=10KN. The allowable stresses in tension and shear is 100MPa and 40MPa.

Monday, 19 March 2018 14:47

Calculation Example – Member Diagram. Featured

Determine the diagrams for moment and shear for the following pinned at two ends beam. Total length 9m. EI constant. Units KN,m.

Thursday, 01 March 2018 17:29

Calculation Example – Maximum Deflection Featured

Determine the equation of the elastic curve for the beam using the x coordinate. Specify maximum deflection. EI is constant.

Wednesday, 14 February 2018 14:41

Calculation Example – Rod loading Featured

Calculate the internal normal forces at points A,B,C for the rod which is loaded with the forces shown.

Tuesday, 30 January 2018 10:55

Calculation Example – Cantilever Beam with point loads. Featured

Draw the shear and moment diagrams for the cantilever beam (units KN,m).

  • Default
  • Title
  • Date
  • Random