|
Online Structural Engineering Library
A collection of publications available on the
internet at no cost. (Currently 535 different recources in 19 sections)
New Additions:
Structural Analysis & Control
Joseph Burns, John Abruzzo, Mark Tamaro, (2002). Structural Systems for
Progressive Collapse Prevention. Paper presented at the National Workshop
on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois.
James R. Cagley, (2002). The Design Professional's Concerns Regarding
Progressive Collapse Design. Paper presented at the National Workshop on
Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois.
W. Gene Corley, (2002). Applicability of Seismic Design in Mitigating
Progressive Collapse. Paper presented at the National Workshop on
Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois.
John E. Crawford, (2002). Retrofit Methods to Mitigate Progressive
Collapse. Paper presented at the National Workshop on Prevention of
Progressive Collapse, July 10-12, 2002, Rosemont, Illinois.
Donald O. Dusenberry and Gunjeet Juneja, (2002). Review of Existing
Guidelines and Provisions Related to Progressive Collapse. Paper
presented at the National Workshop on Prevention of Progressive Collapse,
July 10-12, 2002, Rosemont,
Illinois.
Bruce R. Ellingwood, (2002). Load and Resistance Factor Criteria for
Progressive Collapse Design. Paper presented at the National Workshop on
Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois.
Ted Krauthammer, Robert L. Hall, Stanley C. Woodson, James T. Baylot,
John R. Hayes, Young Sohn, (2002). Development Of Progressive Collapse
Analysis Procedure And Condition Assessment For Structures. Paper
presented at the National Workshop on Prevention of Progressive Collapse,
July 10-12, 2002, Rosemont, Illinois.
D. B. Moore, (2002). The UK and European Regulations for Accidental
Actions. Paper presented at the National Workshop on Prevention of
Progressive Collapse, July 10-12, 2002, Rosemont, Illinois.
David Scott, Barbara Lane, Craig Gibbons, (2002). Fire Induced
Progressive Collapse. Paper presented at the National Workshop on
Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois.
Robert Smilowitz, (2002). Analytical Tools for Progressive Collapse
Analysis. Paper presented at the National Workshop on Prevention of
Progressive Collapse, July 10-12, 2002, Rosemont, Illinois.
Mahoney Erin Elizabeth, (2007). Analyzing the effects of blast loads on
bridges using probability, structural analysis, and performance criteria.
Msc Thesis, Department of Civil Engineering, University of Maryland.
Bridges
Suthar Kunal Narenkumar, (2007). Effect of Dead, Live and Blast Loads on
a Suspension Bridge. MSc Thesis, Department of Civil Engineering,
University of Maryland.
Structural Reliability
Harding G., (2005). Background Paper On Consequences Of Localised Failure
From An Undefined Cause. Workshop on Robustness of Structures, November,
28-29, 2005, Watford, UK. Available from Joint Committee on Structural
Safety.
Carpenter J., (2005). A risk managed framework for ensuring robustness.
Paper for BRE Workshop on Robustness of Structures, November, 28-29,
2005, Watford, UK. Available from Joint Committee on Structural Safety.
Bruce R. Ellingwood, (2007). Quantifying and communicating uncertainty in
seismic risk assessment. Special Workshop on Risk Acceptance and Risk
Communication, March 26-27, 2007, Stanford University, Stanford. Available
from Joint Committee on Structural Safety.
Dimitris Diamantidis, Paolo Bazzurro, (2007). Safety acceptance criteria
for existing structures. Special Workshop on Risk Acceptance and Risk
Communication, March 26-27, 2007, Stanford University. Available from
Joint Committee on Structural Safety.
Peter Tanner, Angel Arteaga, (2007). Structural safety requirements based
on notional risks associated with current practice. Special Workshop on
Risk Acceptance and Risk Communication, March 26-27, 2007, Stanford
University. Available from Joint Committee on Structural Safety.
Torgeir Moan, (2007). Development of accidental collapse limit state
criteria for offshore structures. Special Workshop on Risk Acceptance and
Risk Communication, March 26-27, 2007, Stanford University. Available
from Joint Committee on Structural Safety.
Brian J. Meacham, (2007). Using risk as a basis for establishing
tolerable performance: an approach for building regulation. Special
Workshop on Risk Acceptance and Risk Communication, March 26-27, 2007,
Stanford University. Available from Joint Committee on Structural Safety.
Abbie Liel, Curt Haselton, Gregory Deierlein, Jack Baker, (2007). Assessing
the seismic collapse risk of reinforced concrete frame structures,
including effects of modeling uncertainties. Special Workshop on Risk
Acceptance and Risk Communication, March 26-27, 2007, Stanford
University. Available from Joint Committee on Structural Safety.
Kazuyoshi Nishijima, Marc Maes, Jean Goyet, Michael Havbro Faber, (2007).
Optimal Reliability of Components of Complex Systems Using Hierarchical
System Models. Special Workshop on Risk Acceptance and Risk
Communication, March 26-27, 2007, Stanford University. Available from
Joint Committee on Structural Safety.
Terje Haukaas, (2007). Unified Reliability and Design Optimization in
Earthquake Engineering. Special Workshop on Risk Acceptance and Risk
Communication, March 26-27, 2007, Stanford University. Available from
Joint Committee on Structural Safety.
Sei'ichiro Fukushima, Tsuyoshi Takada, (2007). Probabilistic comparison
of seismic design response spectra. Special Workshop on Risk Acceptance
and Risk Communication, March 26-27, 2007, Stanford University. Available
from Joint Committee on Structural Safety.
Etienne Van der Klashorst, (2007). The reliability based design of
composite beams for the fire limit state. Msc Thesis, Department of Civil
Engineering, Stellenbosch University.
Structural Dynamics
Goosen Alberto, (2007). Structural capacity of freestanding glass
balustrades. Msc Thesis, Department of Civil Engineering, Stellenbosch
University.
Sankaranarayanan Ragunath, (2007). Seismic Response of
Acceleration-sensitive Nonstructural Components Mounted on
Moment-resisting Frame Structures. Dissertation, Department of Civil Engineering,
University of Maryland.
Kevin M. Kingston, (2004). An Evaluation Of Floor Response Spectra For
Acceleration-Sensitive Nonstructural Components Supported On Regular
Frame Structures. MSc Thesis, Department of Civil Engineering, University
of Maryland.
Rigato Antonio, (2007). Influence Of Angle Of Incidence On The Seismic
Demands For Inelastic Structures Subjected To Bi-Directional Ground
Motions. Dissertation, Department of Civil Engineering, University of
Maryland.
Swaminathan Krishnan, (2007). Case Studies of Damage to 19-storey
irregular steel moment-frame buildings under near-source ground motion. Earthquake
Engineering and Structural Dynamics. Vol. 36(7), July 2007. Wiley
Interscience. John Wiley & Sons Ltd.
Repair and Retrofit of Structures
András Megyesi-Jeney, (2006). Renovation questions of industrialized
(without panel) buildings. Periodica Polytechnica, Civil Engineering,
50/1, pp. 43-50. Available from Budapest University of Technology and
Economics.
Tamás Kovács, György Farkas, (2005). Condition Monitoring Of A Lightly
Reinforced Concrete Beam By Dynamic Measurements. Periodica Polytechnica,
Civil Engineering, 49/1, pp. 27-46. Available from Budapest University of
Technology and Economics.
Miklós Müller, (2003). Foundation Strengthening And Grouting By Means Of
Jet Piles For A 9+1-Storey Building With Strengthened-Concrete Framing. Periodica
Polytechnica, Civil Engineering, 47/2, pp. 145-167. Available from
Budapest University of Technology and Economics.
R.G. Limaye, M.K. Kamat, and S. Hotta. Strengthening Chemically
deteriorated concrete Structures. Available from Krishna Conchem Products
Pvt. Ltd. (KCPPL).
B. V. Bhedasgaonkar and M. K. Wadekar. Repairs of beams and Slab with
excessive Deflection. Available from Krishna Conchem Products Pvt. Ltd. (KCPPL).
Abhijit Mukherjee and Mangesh Joshi. Recent advances in repair and
rehabilitation of RCC structures with non-metallic fibers. Available from
Krishna Conchem Products Pvt. Ltd. (KCPPL).
R.G. Limaye, R.D. Angal, A.S. Radke, (2000). Experimental Studies on
penetrating type corrosion inhibitor in reinforced concrete. Indian
Concrete Journal, pp. 26-26. Available from Krishna Conchem Products Pvt.
Ltd. (KCPPL).
M. K. Kamat. Restoration of machine foundations with thermoset polymer
grout. Available from Krishna Conchem Products Pvt. Ltd. (KCPPL).
K. Govindaraj, K. Chakkaravarth, B. Sivagnanam. Repairs and Remedial
Measures to Turbo Generator Foundation in Unit V & VII / T S II. Available
from Krishna Conchem Products Pvt. Ltd. (KCPPL).
M.K. Kamat, B.V. Bhedasgaonkar. Rehabilitation of structurally damaged
and corrosion affected structures using polymer systems. Available from
Krishna Conchem Products Pvt. Ltd. (KCPPL).
Nozaka K., Shield C.K., and Hajjar J.F., (2003). Repair of Fatigued Steel
Bridge Girders with Carbon Fiber Strips. Report No. MN/RC-2004-02,
Minnesota Department of Transportation, St. Paul, Minnesota, December,
163 pp. Available from Jerome F. Hajjar homepage.
Concrete Structures
Kejin Wang, (2004). Proceedings of International Workshop on Sustainable
Development and Concrete Technology, Beijing, China, May 20-21, 2004. Center
for Transportation Research and Education, Iowa University, Ames, Iowa,
USA.
Theodore R. Ferragut, Dale Harrington, Marcia Brink, (2005). Report No:
FHWA-HRT-05-052: Long-Term Plan for Concrete Pavement Research and
Technology - The Concrete Pavement Road Map: Volume I, Background and
Summary. Federal Highway Administration, US Department of Transportation,
Office of Infrastructure Research and Development.
Theodore R. Ferragut, Robert Rasmussen, Michael Darter, Dale Harrington,
Mark Anderson-Wilk, (2005). Report No: FHWA-HRT-05-053: Long-Term Plan
for Concrete Pavement Research and Technology - The Concrete Pavement
Road Map: Volume II, Tracks. Federal Highway Administration, US
Department of Transportation, Office of Infrastructure Research and
Development.
CP Tech Center, (2007). Guide to Concrete Overlay Solutions. National
Concrete Pavement Technology Center, Iowa State University.
Peter C. Taylor, Steven H. Kosmatka, Gerald F. Voigt. et al., (2006). Report
No: FHWA HIF - 07 - 004: Integrated Materials and Construction Practices
for Concrete Pavement: A State-of-the-Practice Manual. National Concrete
Pavement Technology Center, Iowa State University. US Department of
Transportation, Federal Highway Administration.
William H. Hartt, Rodney G. Powers, Diane K. Lysogorski, Virginie Liroux,
Y. Paul Virmani, (2007). Report No: FHWA-HRT-07-039: Corrosion Resistant
Alloys for Reinforced Concrete. Federal Highway Administration, US
Department of Transportation, Office of Infrastructure Research and
Development.
CP Tech Center, (2006). Concrete Paving Training and Field Reference for
Preventing Common Problems. National Concrete Pavement Technology Center,
Iowa State University.
Zsombor Kálmán Szabó, György L. Balázs, (2007). Near surface mounted FRP
reinforcement for strengthening of concrete structures. Periodica
Polytechnica, Civil Engineering, 51/1, pp.33-38. Available from Budapest
University of Technology and Economics.
Erika Csányi, György Balázs, Zoltán József Olasz, (2000). The Effect Of
The Cement Type And Of Curing On The Mass And Deformations Of Hardened
Cement Paste. Periodica Polytechnica, Civil Engineering, 44/2, pp.
151-177. Available from Budapest University of Technology and Economics.
György Balázs, Nguyen Huu Thanh, (2000). Long-term loading examinations
in connection with the law of linear creep. Periodica Polytechnica, Civil
Engineering, 44/2, pp. 179-196. Available from Budapest University of
Technology and Economics.
Tamás Kovács, (2000). Deterioration of reinforced concrete repair mortar
layers. Periodica Polytechnica, Civil Engineering, 44/2, pp. 197-206. Available
from Budapest University of Technology and Economics.
Marcus Klose. Design of Concrete Structures for Offshore Wind Turbines. A
Paper, available from Risř National Laboratory, Wind Energy Department,
Technical University of Denmark.
Khong Hung, (2007). Application Of Laser Shearography For Detecting
Microcracks In Concrete. Msc Thesis, Department of Civil Engineering,
University of Maryland.
Kim Haejin, (2003). Behavior and Performance of High Performance Concrete
for Pavements. Msc Thesis, Department of Civil Engineering, University of
Maryland.
Sayed Sameer, (2004). Behavioral Study of Ultra High Performance Concrete
Girders. Msc Thesis, Department of Civil Engineering, University of
Maryland.
Ceesay Jorgomai, (2007). Characterization of Damage in Mortar and
Concrete Specimens due to Delayed Ettringite Formation (DEF). Dissertation,
Department of Civil and Environmental Engineering, University of
Maryland.
Hunter Opio Konata, (2004). Characterization of Pore Structure and Crack
Propagation in Concrete Using X- Ray Computed Tomography. MSc Thesis,
Department of Civil Engineering, University of Maryland.
Graybeal Benjamin Allen, (2005). Characterization of the Behavior of
Ultra-High Performance Concrete. Dissertation, Department of Civil
Engineering, University of Maryland.
Bennie Stewart David, (2004). Development Of A Performance Based,
Integrated Design/Selection Mixture Methodology For Fiber Reinforced
Concrete Airfield Pavements. Dissertation, Department of Civil
Engineering, University of Maryland.
Ceesay Jorgomai, (2004). The Influence Of Exposure Conditions On Delayed
Ettringite Formation In Mortar Specimens. MSc Thesis, Department of Civil
Engineering, University of Maryland.
Larmie Ernest, (2005). Rehabilitation And Maintenance Of Road Pavements
Using High Early Strength Concrete. MSc Thesis, Department of Civil and
Environmental Engineering, University of Maryland.
M. R. Hansen and Brenda L. Flottmeyer, (1998). Field Performance of
Concrete Admixtures. Research Report No. SD97-09-F. South Dakota
Department of Transportation, South Dakota School of Mines and
Technology.
V. Ramakrishnan, & Kumar R. Santhosh, (2000). The Determination of
the Permeability, Density, and Bond Strength of Non-Metallic Fiber
Reinforced Concrete in Bridge Deck Overlay Applications. Technical Report
No. SD1998-18-F. South Dakota Department of Transportation, South Dakota
School of Mines and Technology.
Steel Structures
Bruneau M., Berman J., Lopez-Garcia D., Vian D., (2007). A Review of
Steel Plate Shear Wall Design Requirements and Research. Paper presented
in 2005 North American Steel Construction Conference. Engineering Journal
of the American Institute of Steel Construction / First Quarter / 2007,
Vol.44, No.4, pp. 27- 34. Seismic Provisions Prefernces.
Anikó Csébfalvi, (2007). Optimal design of frame structures with
semi-rigid joints. Periodica Polytechnica, Civil Engineering, 51/1, 2007,
pp. 9-15. Available from Budapest University of Technology and Economics.
Annamária Dudás, (2006). The Thermal Analysis Of Light Steel-Frame
Dwelling Houses. Periodica Polytechnica, Civil Engineering, 50/1, 2006,
pp.11-17. Available from Budapest University of Technology and Economics.
János Lógó, Sándor Kaliszky, Mohammed Hjiaj, (2006). A Parametric Survey
Of The Influence Of The Semi-Rigid Connections On The Shakedown Of
Elasto-Plastic Frames. Periodica Polytechnica, Civil Engineering, 50/2,
pp.139-147. Available from Budapest University of Technology and
Economics.
Anna Vásárhelyi, (2006). New Aspect Of The Analysis Of Elasto-Plastic Structures
With Time-Dependent Loading. Periodica Polytechnica, Civil Engineering,
50/2, 2006, pp.149-160. Available from Budapest University of Technology
and Economics.
Katalin Vértes, Miklós Iványi, (2005). Investigation Of Minor Axis And 3d
Bolted End-Plate Connections - Experimental And Numerical Analysis - Load
Tests. Periodica Polytechnica, Civil Engineering, 49/1, pp. 47- 58.
Available from Budapest University of Technology and Economics.
Annamária Dudás, (2003). Light Steel Structures In Residential House
Construction. Periodica Polytechnica, Civil Engineering, 47/1, pp.
133-136. Available from Budapest University of Technology and Economics.
Hewetson C.G., (2005). Object - oriented Steel Member Design Framework.
Msc Thesis, Department of Civil Engineering, Stellenbosch University.
Johan Hendrik de Lange, (2007). An experimental investigation into the
behaviour of a 5 ton electric overhead travelling crane and its
supporting structure. Msc Thesis, Department of Civil Engineering,
Stellenbosch University.
Park Kyungha, (2004). Corrosion Resistance of Weathering Steels. MSc
Thesis, Department of Civil Engineering, University of Maryland.
Hartmann Joseph Lawrence, (2005). An Experimental Investigation of the
Flexural Resistance of Horizontally Curved Steel I-Girder Systems. Dissertation,
Department of Civil Engineering, University of Maryland.
Lee D., Cotton S.C., Dexter R.J., Hajjar J.F., Ye Y. and Ojard S.D.,
(2002). Column Stiffener Detailing and Panel Zone Behavior of Steel
Moment Frame Connections. Report No. ST-01-3.2, Department of Civil
Engineering, University of Minnesota, Minneapolis, Minnesota, June, 435
pp. Available from Jerome F. Hajjar homepage.
Cold Formed Steel Structures
A Builder's Guide to Steel Frame Construction. Available from Steel
Framing Alliance (SFA).
A Guide to Fire and Acoustic Data for Cold-Formed Steel Floor and Wall
Assemblies, (2006). Available from Steel Framing Alliance (SFA).
Reynaud Serrette and Khanh Chau, (2003). Estimating the Response of
Cold-Formed Steel Frame Shear Walls. Research Report No. RP03-7. American
Iron Steel Institute. Available from Steel Framing Alliance (SFA).
Development of Cost-Effective, Energy Efficient Steel Framing: Structural
Performance of Slit-Web Steel Wall Studs, (2002). Research Report No.
RP02-8. American Iron and Steel Institute, U.S. Department of Energy -
Washington D.C., NAHB Research Center Inc. Available from Steel Framing
Alliance (SFA).
Galvanized Steel Framing for Residential Buildings, (2006). Research Report
No. RP06-1. American Iron and Steel Institute. NAHB Research Center Inc. Available
from Steel Framing Alliance (SFA).
Shabbir Vagh, J.D. Dolan, W.S. Easterling, (2000). Effect of Anchorage
and Sheathing Configuration on the Cyclic Response of Long Steel-Frame
Shear Walls. Research Report No. RP00-6. American Iron and Steel
Institute. Available from Steel Framing Alliance (SFA).
Monotonic Tests of Cold-Formed Steel Shear Walls With Openings, (1997). Research
Report No. RP97-1. American Iron and Steel Institute. U.S. Department of
Housing and Urban Development. National Association of Home Builders,
NAHB Research Center. Available from Steel Framing Alliance (SFA).
Corrosion of Galvanized Fasteners used in Cold- Formed Steel Framing,
(2004). Research Report No. RP04-4. American Iron and Steel Institute.
University of Hawaii at Manoa. Available from Steel Framing Alliance
(SFA). Appendix A of the report.
Hoang Nguyen, Georgi Hall, Reynaud Serrette, (1996). Shear Wall Values
for Light Weight Steel Framing. Research Report No. RP96-1. American Iron
and Steel Institute. Available from Steel Framing Alliance (SFA).
Reynaud Serrette, Jose Encalada, Georgi Hall, Brandon Matchen, Hoang
Nguyen, Alexander Williams, (1997). Additional Shear Wall Values for Light
Weight Steel Framing. Research Report No. RP97-2. American Iron and Steel
Institute. Available from Steel Framing Alliance (SFA).
Composite Structures
Szilvia Erdélyi, László Dunai, (2004). Behaviour Of A New Type Of
Composite Connection. Periodica Polytechnica, Civil Engineering, 48/1,
pp. 89-100. Available from Budapest University of Technology and
Economics.
Stander Heinrich, (2007). Interfacial bond properties for ECC overlay
systems. Msc Thesis, Department of Civil Engineering, Stellenbosch University.
Boshoff William Peter, (2007). Time-Dependant Behaviour of Engineered
Cement-Based Composites. PhD Thesis, Department of Civil Engineering,
Stellenbosch University.
Tort C. and Hajjar J.F., (2007). Reliability-Based Performance-Based
Design of Rectangular Concrete- Filled Steel Tube (RCFT) Members and
Frames. Structural Engineering Report No. ST-07-1, Department of Civil
Engineering, University of Minnesota, Minneapolis, Minnesota, August, 401
pp. Available from Jerome F. Hajjar homepage.
Krzmarzick D. and Hajjar J.F., (2006). Load Rating of Composite Steel
Curved I-Girder Bridges through Load Testing with Heavy Trucks. Report
No. MN/RC- 2006-40, Minnesota Department of Transportation, St. Paul,
Minnesota, October, 546 pp. Available from Jerome F. Hajjar homepage.
Tort C. and Hajjar J.F., (2003). Damage Assessment of Concrete-Filled
Steel Tube Members and Frames. Structural Engineering Report No. ST-03-1,
Department of Civil Engineering, University of Minnesota, Minneapolis,
Minnesota, April, 318 pp. Available from Jerome F. Hajjar homepage.
Seismic Design
Grauvilardell J.E., Lee D., Hajjar J.F., and Dexter R.J., (2004). Synthesis
of Design, Testing, and Analysis Research on Steel Column Base Plate
Connections in High Seismic Zones. Structural Engineering Report No.
ST-04-02, Department of Civil Engineering, University of Minnesota,
Minneapolis, Minnesota. Available from Jerome F. Hajjar homepage.
Swaminathan Krishnan, Chen Ji, Dimitri Komatitsch, and Jeroen Tromp,
(2006). Performance of Two 18- Story Steel Moment-Frame Buildings in
Southern California During Two Large Simulated San Andreas Earthquakes. Earthquake
Spectra, Vol.22, No.4, pp. 1035-1061, Earthquake Engineering Research
Institute. Available from Swaminathan Krishnan home page.
Swaminathan Krishnan, Chen Ji, Dimitri Komatitsch, and Jeroen Tromp,
(2006). Case Studies of Damage to Tall Steel Moment-Frame Buildings in
Southern California During Large San Andreas Earthquakes. Bulletin of the
Seismological Society of America, Vol.96 , No.4A, pp. 1523-1537, . Available
from Swaminathan Krishnan home page.
Swaminathan Krishnan and John F. Hall, (2006). Modeling Steel Frame
Buildings in Three Dimensions - Part I: Panel Zone and Plastic Hinge Beam
Elements. Journal of Engineering Mechanics, Vol.132, No.4.
Swaminathan Krishnan and John F. Hall, (2006). Modeling Steel Frame
Buildings in Three Dimensions - Part II: Elastofiber Beam Element and
Examples. Journal of Engineering Mechanics, Vol.132, No.4.
Wind Effects on Structures
Niels Jacob Tarp-Johansen, (2004). Partial Safety Factors and
Characteristic Values for Combined Extreme Wind and Wave Load Effects. Special
Topic Conference, TU Delft 2004. Available from Risř National Laboratory,
Wind Energy Department, Technical University of Denmark.
Visit the Online Structural Engineering Library
|
