|Online Structural Engineering Library|
collection of publications available on the internet at no cost.
Currently the Online Structural Engineering Library
includes 2210 documents in 20 categories and 2654 authors.
Structural Analysis and Control
A. Kaveh, M. Shahrouzi, and Y. Naserifar, (2010). Tuned genetic algorithms for finding p-medians of a weighted graph. Scientia Iranica, Transition A: Civil Engineering, Vol.17, No.5, pages 350-362.
Moslemi and A. R. Khoei, (2010). 3D modeling of damage growth and crack
initiation using adaptive finite element technique. Scientia Iranica,
Transition A: Civil Engineering, Vol.17, No.5, pages 372-386.
P. Bentz, P. E. Stutzman, A. Sakulich, and W. J. Weiss, (2012). Study
of early-age bridge deck cracking in Nevada and Wyoming. NISTIR 7841,
National Institute of Standards and Technology, U.S. Department of
Alkhrdaji and Antonio Nanni, (2002). Design, construction, and
field-testing of an RC box culvert bridge reinforced with GFRP bars,
Center for Infrastructure Engineering Studies, University of
Missouri-Rolla, CIES 02-25.
Repair and Retrofit of Structures
Arefi, S. Pampanin and M. Cubrinovski (2009). Effects of SSI on the
seismic response of older structures before & after retrofit. Paper
43, 2009 NZSEE Conference.
J. Jirsa and O. Bayrak, (2009). Use of CFRP anchors to strengthen lap
splices of rectangular RC columns. FRPRCS-9, Sydney, Australia.
Gustavo Tumialan, Nestore Galati, Sinaph M. Namboorimadathil, and
Antonio Nanni (2002). Strengthening Of masonry with near surface mounted
B., Bruneau, M., (2011). Plastic moment of intermediate horizontal
boundary elements of steel plate shear walls. AISC Engineering Journal,
Vol.48, No.1, pp.49-64.
Cold Formed Steel Structures
L. D. Luttrell, (2011).Perforated metal deck design with commentary, and Appendix B. Steel Deck Institute, Report No. PMDDWC.
J. Weiss, D. P. Bentz, A. Schlinder, and P. Lura, (2012). Internal
curing: Constructing more robust concrete, Structure, January 2012,
P. Bentz, P. M. Halleck, M. N. Clarke, E. J. Garboczi, and A. S.
Grader, (2005). Microstructure and materials science of fire resistive
materials. Proceedings of ASCE/SEI Spring 2005 Structures Congress, New
Hajjar and Roberto Leon, (2011). Towards systems behavior factors for
composite frames: experimental and analytical studies.University of
Illinois at Urbana-Champaign and Georgia Tech. 3282
Jacobs, W. P. and Hajjar, J. F. (2010). Load transfer in composite construction. Proceedings of the ASCE/SEI Structures Congress 2010, Orlando, Florida, ASCE, Reston, Virginia.
P. Stewart, Norman A. Abrahamson,Gail M. Atkinson, Jack W. Baker, David
M. Boore, Yousef Bozorgnia, Kenneth W. Campbell, Craig D. Comartin, I.
M. Idriss, Marshall Lew, Michael Mehrain, Jack P. Moehle, Farzad Naeim,
and Thomas A. Sabol, (2011). Representation of bi-directional ground
motions for design spectra in building codes. Earthquake Spectra, Volume
27, No. 3, pages 927-937.
K. Victorsson, Greg Deierlein, and Jack W. Baker (2011). Capacity
design in seismic resistant steel buildings: a reliability-based
methodology to establish capacity-design factors. EUROSTEEL 2011,
Standards and Design Codes
American National Standard Institute/Steel Deck Institute, (2009). C1.0 - 2006 Standard forComposite Steel Floor Deck
Halil Sezen and Kevin A. Giriunas (2009). Progressive collapse analysis of an existing building. The Ohio State University.
of Fire Protection Engineers, (2004). Engineering guide: Fire exposures
to structural elements. The SFPE Task Group on Fire Exposures to
Visit the Online Structural Engineering Library