Online Structural Engineering Library
A collection of publications available on the internet at
no cost. (Currently 1,433 different resources in 20
sections).
New
Additions:
Structural Analysis &
Control
MacPhedran, I.J. and Grondin, G.Y. (2009).
Frame Stability Considering Member Interaction and
Compatibility of Warping Deformations. Structural Engineering
Report 283, Department of Civil and Environmental Engineering,
University of Alberta.
Structural Reliability
Li, C., Grondin, G.Y., and Driver, R.G., (2007).
Reliability Analysis of Concentrically Loaded Fillet Welded
Joints. Structural Engineering Report 271, Department of Civil
and Environmental Engineering, University of Alberta.
Grondin, G.Y., Jin, M., and Josi, G., (2007). Slip
Critical Bolted Connections - A Reliability Analysis for
Design at the Ultimate Limit State. Structural Engineering
Report 270, Department of Civil and Environmental Engineering,
University of Alberta.
Structural Dynamics
Crick, D., Grondin, G.Y., (2008). Monitoring and
Analysis of a Temporary Grandstand. Structural Engineering
Report 275, Department of Civil and Environmental Engineering,
University of Alberta.
Cold Formed Steel
Structures
Pham, C.H., and Hancock, G.J., (2009).
Experimental Investigation of High Strength Cold-Formed
C-Section in Combined Bending and Shear. Research Report No
R894, School of Civil Engineering, The University of Sydney,
Australia.
Composite Structures
Lui,
G.K., and Alexander, S.D.B., (2007). Fatigue of Steel Plate -
Elastomer Composite Beams. Structural Engineering Report 274.
Department of Civil and Environmental Engineering, University
of Alberta.
Begum, M., Driver, R.G., and Elwi, A.E.
(2007). Numerical Simulations of the Behaviour of Partially
Encased Composite Columns. Structural Engineering Report 269,
Department of Civil and Environmental Engineering, University
of Alberta.
Little, J., Grondin, G.Y., and Alexander,
S.D.B., (2007). Sandwich Plate System Under In-Plane Load and
Uniform Lateral Pressure. Structural Engineering Report 267,
Department of Civil and Environmental Engineering, University
of Alberta.
Masonry Structures
Lourenco, P.B., (2002). Guidelines for the Analysis of
Historical Masonry Structures. Finite Elements in Engineering
and Science, M.A.N. Hendriks et al (Eds.), A. A. Balkema,
Rotterdam, The Netherlands, pp. 241- 247.
Lourenco,
P.B., (2000). A Macro-Model for the Out-Of- Plane Behaviour of
Masonry. Procedings of the 12th International Brick/Block
Masonry Conference, Madrid, Spain, pp.
1101-1114.
Seismic Design
Fonseca, G.M.,
Silva, R.M., and Lourenco, P.B., (1998). The Behaviour of two
Masonry Infilled Frames: A Numerical Study. Proceedings of the
4th World Congress on Computational Mechanics, Buenos Aires,
Argentina.
General
FEMA 426, (2003). Risk
Management Series: Reference Manual to Mitigate Potential
Terrorist Attacks Against Buildings. Providing Protection to
People and Buildings. Federal Emergency Management,
Agency.
FEMA 427, (2003). Risk Management Series:
Primer for Design of Commercial Buildings to Mitigate
Terrorist Attacks. Providing Protection to People and
Buildings. Federal Emergency Management, Agency.
FEMA
428, (2003). Risk Management Series: Primer to Design Safe
School Projects in Case of Terrorist Attacks. Providing
Protection to People and Buildings. Federal Emergency
Management, Agency.
FEMA 429, (2003). Risk Management
Series: Primer for Design of Commercial Buildings to Mitigate
Terrorist Attacks. Providing Protection to People and
Buildings. Federal Emergency Management, Agency.
Visit the Online Structural
Engineering Library 
