Online Structural Engineering Library
A collection of publications available on the internet at
no cost. (Currently 1,044 different recources in 20
sections).
New
Additions:
Structural Analysis &
Control
A. Kaveh, and B. Dadfar, (2008). Optimum
Seismic Design of Steel Moment Resisting Frames by Genetic
Algorithms. Asian Journal of Civil Engineering (Building and
Housing) Vol. 9, No.2, pages 107-129.
A. Kaveh, M.
Jahanshahi, and M. Khanzadi, (2008). Plastic Analysis of
Frames Using Genetic and Ant Colony Algorithms. Asian Journal
of Civil Engineering (Building and Housing) Vol. 9, No. 3,
Pages 229- 249.
Jian Zhao, (2007). Modeling of Strain
Penetration Effects in Fiber-Based Analysis of Reinforced
Concrete Structures. ACI Structural Journal.
R.
Eligehausen, J. Ozbolt, G. Genesio, M.S. Hoehler, and S.
Pampanin, (2006). Three-Dimensional Modelling of Poorly
Detailed RC Frame Joints. Proceedings of the Annual NZSEE
Conference, Napier, paper No.
23.
Bridges
S. Lagomarsino, S. Resemini,
(2007). The Prarolo Railway Arch Bridge in Italy: Structural
Assessment and Analysis through Traditional Mechanical
Methods. ARCH'07: 5th International Conference on Arch
Bridges, Multicomp, Lda Publishers, Madeira, pp. 237- 248.
Concrete Structures
M.V. Krishna Rao, P.
Rathish Kumar, and N.V.R.C. Bala Bhaskar, (2008). Effect of
Re-Vibration on Compressive Strength of Concrete. Asian
Journal of Civil Engineering (Building and Housing) Vol. 9,
No. 3, pp. 291-301.
Abid A. Shah, (2005). Experimental
Investigation of Column-Slab Joints. ACI Structural
Journal.
Thomas H-K Kang, (2005). Dynamic Responses of
Flat Plate Systems with Shear Reinforcement. ACI Structural
Journal.
Mohammed E. Haque, Murtuza Aluminiumwalla,
(2004). A Virtual Tour of a Reinforced Concrete Building
Construction. Proceedings of the 2004 American Society for
Engineering Education Annual Conference & Exposition,
2004. American Society for Engineering Education.
Prestressed Concrete Structures
Job
Thomas, (2006). Shear Strength of Prestressed Concrete T-Beams
with Steel Fibers Over Partial/Full Depth. ACI Structural
Journal.
James D. Rogers (2004). Design of Prestressed
Barrier Cable Systems. Technical Notes, No. 14. Post-
Tensioning Institute (PTI).
Christina Keller, Nguyen
Viet Tue and Martin Zink, (2002). Influence of Prestressing
Forces on the Shear Capacity - Part 1 Beams without Shear
Reinforcement. LACER No. 7, 2002, pp. 287- 296.
Seng
Vong, Hiroshi Shima, (2006). Design of Pretension Prestressed
Concrete Girder Bridge for Cambodian Rehabilitation. 10th East
Asia-Pacific Conference on Structural Engineering and
Construction, August 3 - 5, 2006, Bangkok, Thailand.
Composite Structures
D. Van Gemert, L.
Czarnecki, P. Lukowski and E. Knapen, (2006). Cement Concrete
and Concrete- Polymer Composites: Two Merging Worlds: A report
from 11th ICPIC Congress in Berlin, 2004. Proceedings of ISPIC
International Symposium Polymers in Concrete, Guimaraes,
Portugal, pp. 1- 12.
D. Van Gemert and E. Knapen,
(2006). Recent Development of Concrete Polymer Composites in
Belgium. 5th Asian Symposium on Polymers in Concrete, Chennai,
India.
D.A. Jacobson, L.C. Bank, M.G. Oliva and J.S.
Russell, (2005). Punching Shear Capacity of Double Layer FRP
Grid Reinforced Slabs. Proceedings of the 7th Symposium on FRP
in Reinforced Concrete Structures- FRPRCS7, SP-230, American
Concrete Institute, Farmington Hills, MI, pp.
857-876.
M. Oliva, L. Bank, H-U. Bae, J. Barker, S-W.
Yoo, (2007). FRP Stay-in-Place Formwork and Reinforcing for
Concrete Highway Bridge Decks. Proceedings of FRPRCS8, 8th
International Symposium on FRP in Reinforced Concrete
Structures, July 16-18, Patras, GREECE, pp. 602-
603.
Seismic Design
B. Qu, M. Bruneau, C.
H. Lin, and K. C. Tsai, (2008). Testing of Full Scale
Two-story Steel Plate Shear Walls, with Reduced Beam Section
Connections and Composite Floor. ASCE Journal of Structural
Engineering, Vol. 134, No.3, pp. 364-373.
J.W. Berman,
and M. Bruneau, (2008). Capacity Design of Vertical Boundary
Elements in Steel Plate Shear Walls. AISC Engineering Journal,
Vol. 45, No. 1, pp. 57-71.
Omer Onur Erbay, (2007). A
Methodology to Assess Seismic Risk for Populations of
Unreinforced Masonry Buildings. Report 07-10. Mid-America
Earthquake Center, Civil and Environmental Engineering,
University of Illinois at Urbana-Champaign.
K.R. Karim,
and F. Yamazaki, (2007). Effect of Isolation on Fragility
Curves of Highway Bridges based on Simplified Approach. Soil
Dynamics and Earthquake Engineering, Vol. 27, pp. 414-426.
Elsevier Ltd.
Wind Effects on
Structures
D. Dooms, G. Degrande, G. De Roeck, and
E. Reynders, (2004). Wind induced Vibrations of Thin- Walled
Cylindrical Structures. ISMA2004 International Conference on
Noise and Vibration Engineering, pages 781-796, Leuven,
Belgium.
Andreas Berneiser, and Gert Konig, (1997).
Wind Loads in City Centres Demonstrated at the New Commerzbank
Building in Frankfurt/Main. LACER, No. 2, pp.
231-244.
General
N. Subramanian, (2008).
Olympic Structures of China. New Building Materials &
Construction World Magazine (NBM&CW), New
Delhi.
Visit the Online Structural
Engineering Library 
