Online Structural Engineering Library
A collection of publications available on the internet at
no cost. (Currently 992 different recources in 20
sections).
New
Additions:
Repair and Retrofit of
Structures
Concrete
Structures
Bénichou N. Green, M.F. Bisby L. Kodur
V.R., (2008). The Fire Performance of FRP-Strengthened
Concrete Systems (invited paper). SFPE-SAC Fire Science &
Technology Conference, Al Khobar, Saudi Arabia, pp. 1-9,
(NRCC-50850).
Baris Binici, Khalid M. Mosalam, (2007).
Analysis of Reinforced Concrete Columns Retrofitted with Fiber
Reinforced Polymer Lamina. ScienceDirect, Composites: Part B,
Vol. 38, pp. 265-276. Elsevier Ltd.
A.A. Amiruddin, S.
Hino, K. Yamaguchi, S. Nakamura, (2007). A Numerical Analysis
of Seismic Retrofitting Effect on Reinforced Concrete Piers by
Using PCM Shotcrete Method. Memoirs of the Faculty of
Engineering, Kyushu University, Vol.67, No.3, pp. 58- 94.
S. Giovinazzi, S. Lagomarsino, and S. Pampanin,
(2006). Vulnerability Methods and Damage Scenario for Seismic
Risk Analysis as Support to Retrofit Strategies: a European
Perspective. Proceedings of the Annual NZSEE Conference,
Napier.
Nathan Johnson, (2005). Seismic Retrofit of
Octagonal Columns with Pedestal and One-Way Hinge at Base. ACI
Structural Journal.
Mahmoud R. Maheri, (2005). Recent
Advances in Seismic Retrofit of RC Frames. Asian Journal of
Civil Engineering (Building and Housing), Volume 6, Number 5,
pp. 373-391.
N. Muraoka, F. Yamazaki, (2005).
Evaluation of the Effects of Seismic Retrofit for Reinforced
Concrete School Buildings Using Microtremor Observation.The
1st International Conference on Urban Disaster Reduction,
Kobe, Japan.
Scott Poveromo, (2003). The Use of Fiber
Reinforced Polymer Composites to Retrofit Reinforced Concrete
Bridge Columns. In Partial Fulfillment of Course Requirements
for MATE 115, Course Instructor: Professor G. Selvaduray San
José State University, California, USA.
John E.
Crawford, L. Javier Malvar, Kenneth B. Morril and John M.
Feritto, (2001). Composite Retrofits to Increase the Blast
Resistance of Reinforced Concrete Buildings. Paper presented
at the 10th International Symposium on Interaction of the
Effects of Munitions with Structures.
Omar Chaallal
and Mohsen A. Shahawy, (1999). Behavior of Reinforced Concrete
Beam-Column Retrofitted with Composite Wrapping Systems.
Preliminary Report, Structural Research Center, Florida
Department of Transportation, Tallahassee, Florida.
Oral Buyukozturk and Brian Hearing, (1998).
Performance of Retrofitted Concrete Using FRP. "Performance of
Concrete Structures in the Arabian Gulf Environment", King
Fahd University of Petroleum and Minerals, Dhahran, Saudi
Arabia, pp. 349-358.
Masonry
Structures
Rodica Popescu, Gheorghe Popescu, Andrei
Craifaleanu, (2006). Design Methodologies for the Assessment
of the Seismic Performance of Masonry Walls. 1st European
Conference on Earthquake Engineering and Seismology (a joint
event of the 13th ECEE& 30th General Assembly of the ESC),
Geneva, Switzerland, 3-8 Sep. 2006, paper No. 1380.
P.B. Lourenco, (2004) Analysis and Restoration of
Ancient Masonry Structures: Guidelines and Examples.
Innovative Materials and Technologies for Construction and
Restoration, Lecce, Italy, pp. 23-41.
D. Van Gemert,
F. Van Rickstal, S. Ignoul, E.E. Toumbakari, and K.Van Balen,
(2003). Structural Consolidation and Strengthening of Masonry:
Historical Overview and Evolution. MSR VI International
Conference Materials Science and Restoration, Karlsruhe,
Seminar 'Consolidation of Masonry', Advances in Materials
Science and Restoration AMSR 1, pp. 1-20.
Concrete
Structures
Pradip Sarkar, Maidhily Govind and
Devdas Menon, (2006). Estimation of Short-term Deflections in
Two- way RC Slabs: Review of Code Provisions. Proceedings of
the 2nd International Congress on Computational Mechanics and
Simulation (ICCMS06), December 8 - 10, 2006.
Raveendra
Babu. R and Gurmail S. Benipal, (2006). Plastic Modulus for
Concrete. Proceedings of the 2nd International Congress on
Computational Mechanics and Simulation (ICCMS06), December 8 -
10, 2006.
Composite Structures
Upendra
K. Mallela, Rajeev Chandak and Akhil Upadhyay, (2006).
Laminated Composites for Structural Engineering - Perspective
Applications and Challenges. Proceedings of the 2nd
International Congress on Computational Mechanics and
Simulation (ICCMS06), December 8 - 10, 2006.
S.
Pradyumna and J.N. Bandyopadhyay, (2006). Static and Free
Vibration Analysis of Laminated Conoids Using a Higher-Order
Theory. Proceedings of the 2nd International Congress on
Computational Mechanics and Simulation (ICCMS06), December 8 -
10, 2006.
Pramod Kumar, Rakesh Chandra, S.P. Singh,
(2006). Micromechanical Bridging Model for the Prediction of
Damping in Fiber Reinforced Composites. Proceedings of the 2nd
International Congress on Computational Mechanics and
Simulation (ICCMS06), December 8 - 10, 2006.
Ajay
Kumar Garg, Rakesh Kumar Khare and Tarun Kant, (2006). Free
Vibration of Laminated Folded Plates using a Shear Deformable
Finite Element Model. Proceedings of the 2nd International
Congress on Computational Mechanics and Simulation (ICCMS06),
December 8 - 10, 2006.
Masonry
Structures
Pardeep Kumar and N.M. Bhandari, (2006).
Nonlinear Finite Element Analysis of Masonry Arch Bridges.
Proceedings of the 2nd International Congress on Computational
Mechanics and Simulation (ICCMS06), December 8 - 10, 2006.
Seismic Design
Sachin M. Pore, Dipendu
Bhunia, Vipul Prakash, A.D. Pandey, G.I. Prajapati, (2006).
Effect of Response Reduction Factor in Performance Based
Seismic Design of RC Buildings for India. Proceedings of the
2nd International Congress on Computational Mechanics and
Simulation (ICCMS06), December 8 - 10, 2006.
S.
Chandrasekaran & Varun Gupta, (2006). Performance Based
Design for RC Framed Buildings. Proceedings of the 2nd
International Congress on Computational Mechanics and
Simulation (ICCMS06), December 8 - 10, 2006.
Soft
Computing Applications
Sanjay Kumar Singh, K.
Srinivasan and D. Chakraborty, (2006). Simulation of Crack
Prediction using Acoustic Emission and Artificial Neural
Network. Proceedings of the 2nd International Congress on
Computational Mechanics and Simulation (ICCMS06), December 8 -
10, 2006.
Stefanos Drakos, Hyu-Soung Shin and Gyan N.
Pande, (2006). Finite Elements with Artificial Intelligence.
Proceedings of the 2nd International Congress on Computational
Mechanics and Simulation (ICCMS06), December 8 - 10, 2006.
Visit the Online Structural
Engineering Library