Structural Reliability

Wiley & Sons, Chichester, UK, 1996, Edition 1. Edition 2.1: September 2002 zip-pdf-file (2.6 MB, course 41225)
with correction of several misprints in Chapters 2, 3 (per 02.02.), 4, 5 (per 09.02.), 6 (per 10.02.2003. (per
09.02.). Available by Ove Ditlensen's personal website .

J. Song, A. Kiureghian, J. Sackman, PEER Report 2005/16 - Seismic Response and Reliability of Electrical
Substation Equipment and Systems.

Kudsi T. and Fu C.C., (2002). Redundancy Analysis of Existing Truss Bridges: A System Reliability-based
Approach. 1st International Conference on Bridge Maintenance, Safety and Management 2002 (IABMAS'02),
Barcelona, Spain.

Song J., and A. Der Kiureghian, (2003). Bounds on system reliability by linear programming. Journal of
Engineering Mechanics ASCE, 129(6), 627-636.

Workshop on Reliability Based Code Calibration, Papers and Presentations, (2002). Swiss Federal Institute of
Technology, ETH Zurich, Switzerland. Available from Joint Committee on Structural Safety (JCSS).

Bruneau M., (1992). Evaluation of System-Reliability Methods for Cable-Stayed Bridge Design. ASCE Journal of
Structural Engineering, Vol.118, No.4, pp.1106-1120. Available from Michel Bruneau Webpage, State University
of New York at Buffalo.

Harding G., (2005). Background Paper On Consequences Of Localised Failure From An Undefined Cause.
Workshop on Robustness of Structures, November, 28-29, 2005, Watford, UK. Available from Joint Committee on
Structural Safety.

Carpenter J., (2005). A risk managed framework for ensuring robustness. Paper for BRE Workshop on
Robustness of Structures, November, 28-29, 2005, Watford, UK. Available from Joint Committee on Structural
Safety.

Bruce R. Ellingwood, (2007). Quantifying and communicating uncertainty in seismic risk assessment. Special
Workshop on Risk Acceptance and Risk Communication, March 26-27, 2007, Stanford University, Stanford.
Available from Joint Committee on Structural Safety.

Dimitris Diamantidis, Paolo Bazzurro, (2007). Safety acceptance criteria for existing structures. Special Workshop
on Risk Acceptance and Risk Communication, March 26-27, 2007, Stanford University. Available from Joint
Committee on Structural Safety.

Peter Tanner, Angel Arteaga, (2007). Structural safety requirements based on notional risks associated with
current practice. Special Workshop on Risk Acceptance and Risk Communication, March 26-27, 2007, Stanford
University. Available from Joint Committee on Structural Safety.

Torgeir Moan, (2007). Development of accidental collapse limit state criteria for offshore structures. Special
Workshop on Risk Acceptance and Risk Communication, March 26-27, 2007, Stanford University. Available from
Joint Committee on Structural Safety.

Brian J. Meacham, (2007). Using risk as a basis for establishing tolerable performance: an approach for building
regulation. Special Workshop on Risk Acceptance and Risk Communication, March 26-27, 2007, Stanford
University. Available from Joint Committee on Structural Safety.

Abbie Liel, Curt Haselton, Gregory Deierlein, Jack Baker, (2007). Assessing the seismic collapse risk of reinforced
concrete frame structures, including effects of modeling uncertainties. Special Workshop on Risk Acceptance and
Risk Communication, March 26-27, 2007, Stanford University. Available from Joint Committee on Structural Safety.

Kazuyoshi Nishijima, Marc Maes, Jean Goyet, Michael Havbro Faber, (2007). Optimal Reliability of Components of
Complex Systems Using Hierarchical System Models. Special Workshop on Risk Acceptance and Risk
Communication, March 26-27, 2007, Stanford University. Available from Joint Committee on Structural Safety.

Terje Haukaas, (2007). Unified Reliability and Design Optimization in Earthquake Engineering. Special Workshop
on Risk Acceptance and Risk Communication, March 26-27, 2007, Stanford University. Available from Joint
Committee on Structural Safety.

Sei’ichiro Fukushima, Tsuyoshi Takada, (2007). Probabilistic comparison of seismic design response spectra.
Special Workshop on Risk Acceptance and Risk Communication, March 26-27, 2007, Stanford University.
Available from Joint Committee on Structural Safety.

Etienne Van der Klashorst, (2007). The reliability based design of composite beams for the fire limit state. Msc
Thesis, Department of Civil Engineering, Stellenbosch University.

R.A. Khan, T.K. Datta, and S. Ahmad, (2005). Reliability Analysis of Fan Type Cable Stayed Bridges Against First
Passage Failure under Earthquake Forces. Journal of Seismology and Earthquake Engineering, Volume 7, No. 3.

B.M. Ayyub, I.I. Assakkaf, K.I. Atua, (2000). Reliability-Based Load and Resistance Factor Design (LRFD) of Hull
Girders for Surface Ships. ASNE Day 2000. American Society of Naval Engineers, Alexandria.

B.M. Ayyub, I.A. Assakkaf, J.E. Beach, W.M. Melton, N. Nappi, J.A. Conley, (2001). Methodology for Developing
Reliability-Based Load and Resistance Factor Design (LRFD) Guidelines for Ship Structures. Naval Engineers
Journal, ASNE.

B.M. Ayyub, I.A. Assakkaf, J.P. Sikora, J.C. Adamchack, K. Atua, W. Melton, P.E. Hess, (2001). Reliability-Based
Load and Resistance Factor Design (LRFD) Guidelines for Hull Girder Bending. Naval Engineers Journal, ASNE.

I.A. Assakaf, B.M. Ayyub, P.E. Hess, D.E. Knight, (2002). Reliability-Based Load and Resistance Factor Design
(LRFD) Guidelines for Unstiffened Panels of Ship Structures. Naval Engineers Journal, ASNE.

I.A. Assakkaf, B.M. Ayyub, P.E. Hess, K. Atua, (2002). Reliability-Based Load and Resistance Factor Design (LRFD)
Guidelines for Stiffened Panels and Grillages of Ship Structures. Naval Engineers Journal, ASNE.

B.M. Ayyub, I.A. Assakkaf, D.P. Kihl, M.W. Sieve, (2002). Reliability-Based Design Guidelines for Fatigue of Ship
Structures. Naval Engineers Journal, ASNE.

L. Schueremans and D. Van Gemert, (2003). System Reliability Methods Using Advanced Sampling Techniques.
ESREL 2003, Maastricht.

L. Schueremans and D.Van Gemert, (1998). Reliability Analysis in Structural Masonry Engineering. IABSE
Colloquium "Saving Buildings in Central and Eastern Europe", Berlin.

Maria M. Szerszen, Aleksander Szwed, Andrzej S. Nowak, (2005). Reliability Analysis for Eccentrically Loaded
Columns. ACI Structural Journal.

Structural Reliability

Copyright © 2000-2009 ICICE Disclaimer/Copyrights/Permissions

simple hit counter