General

Starossek, U.; Wolff, M. (2005). "Design of collapse-resistant structures." Workshop paper, JCSS and IABSE
Workshop on Robustness of Structures, Building Research Establishment, Garston, Watford, UK, November 28-
29, 2005.

Starossek, U. (2006). "Progressive collapse of structures: Nomenclature and procedures." IABSE, Structural
Engineering International, Vol. 16, No. 2, May 2006.

Starossek, U.; Wolff, M. (2005). "Progressive collapse: Design strategies." Report, IABSE Symposium "Structures
and Extreme Events," Lisbon, Portugal, September 14-17, 2005.

Engineering and Design - Structural Design and Evaluation of Outlet Works, 02 June 03, EM 1110-2-2400, US
Army Corps of Engineers

Engineering and Design - Instrumentation for Concrete Structures, 15 September 1980, EM 1110-2-4300, US
Army Corps of Engineers

Thomas J. Mackin, (2001). Engineering Analysis of Tragedy at World Trade Center . Department of Mechanical
Engineering, The University of Illinois at Urbana-Champaign.

Tim Wilkinson, (2006). World Trade Center Collapse - Some Engineering Aspects . School of Civil Engineering, The
University of Sydney, NSW, Australia.

Tim Wilkinson, (2002). The World Trade Center and 9/11: A Discussion on Some Engineering Design Issues .
“Safe Buildings for This Century”, Australian Institute of Building Surveyors National Conference, Darling Harbour,
Sydney, Australia.

Z. P. Bazant and Mathieu Verdure, (2007). Mechanics of Progressive Collapse: Learning from World Trade Center
and Building Demolitions. ASCE Journal of Engineering Mechanics, Vol. 133, No. 3.

Z. P. Bazant, Jia-Liang Le, Frank R. Greening and David B. Benson, (2007). C ollapse of World Trade Center
Towers: What Did and Did Not Cause It?Structural Engineering Report No. 07-05/C605c, Department of Civil and
Environmental Engineering, Northwestern University, Evanston, Illinois, USA. Journal of Engineering Mechanics,
ASCE.

G. Charles Clifton, (2001). Collapse of the World Trade Centre Towers. HERA Structural Engineer.

Dr. Steven E. Jones, (2006). Why Indeed Did the WTC Buildings Completely Collapse? Journal of 9/11 Studies,
Volume 3.

EPA’s Response to the World Trade Center Collapse: Challenges, successes and Areas for Improvement , (2003).
Report No. 2003-P00012. Environmental Protection Agency. U.S. Office of Inspector General.

E -conference on Professional Issues in Structural Engineering in India, (2002).National Information Centre of
Earthquake Engineering (NICEE) at Indian Institute of Technology, Kanpur, India.

Ben W. J. van Rensburg, (2003). Structural Engineering Education: Effective Teaching and Learning. Proceedings
of the 2003 ASEE/WFEO International Colloquium, American Society for Engineering Education.

Mohammed E. Haque, (2001). Web-based Visualization Techniques for Structural Design Education. Proceedings
of the 2001 American Society for Engineering Education Annual Conference & Exposition. American Society for
Engineering Education.

Nirmal K. Das, (2002). Teaching and Learning Structural Analysis Using Mathcad. Proceedings of the 2002
ASEE/SEFI/TUB Colloquium. American Society for Engineering Education.

Beyond September 11th: An Account of Post-disaster Research: This book is a cooperative production of the
Public Entity Risk Institute of Fairfax, Virginia; the Institute for Civil Infrastructure Systems at New York
University's Robert F. Wagner Graduate School of Public Service (a partnership of New York University, Cornell
University, Polytechnic University and the University of Southern California); and the Natural Hazards Center at
the University of Colorado at Boulder. (ISBN 1-877943-16-9). Available from Natural Hazards Center at the
University of Colorado at Boulder.

C. S. Cai, Wenjie Wu, Suren Chen and George Voyiadjis, (2003). Applications of Smart Materials in Structural
Engineering. LTRC Project No. 02-4TIRE. State Project No. 736-99-1055. Louisiana Department of Transportation
and Development. Louisiana Transportation Research Center.

Kicinger R., (2006). Evolutionary developmental system for structural design. De velopmental Systems. Papers
from the AAAI Fall Symposium. Technical Report FS-06-03, The American Association for Artificial Intelligence,
Menlo Park, CA, 1-8. Available from Rafal Kicinger’s Professional homepage.

Kicinger R., Arciszewski T. and De Jong K. A. (2005). Evolutionary computation and structural design: a survey of
the state of the art. Computers & Structures, 83(23-24), 1943-1978. Available from Rafal Kicinger’s Professional
homepage.

Structural Design Criteria For Structures Other Than Buildings, (1991). Technical Manual, Publication Number:
Army TM 5-809-6. Available from US Army Corps of Engineers. Department of the Army, the Navy and the Air
Force.

Kurt Gramoll, (2007). A Web-based Electronic Book (EBook) for Solid Mechanics. Proceedings of the 2007
American Society for Engineering Education Annual Conference & Exposition, Honolulu, HI. American Society for
Engineering Education.

eMi EA Structural Engineering Resource Manual: This manual has some typical drawings for different building
types and some information about typical construction practices in Africa. Designing a world of hope. Available
from Engineering Ministries International (EMI), East Africa.

Stalker R.A. (2000). Engineer-Computer Interaction for Structural Monitoring. PhD. Thesis No. 2199, Swiss
Federal Institute of Technology, Lausanne.

Stalker R. and Smith I., (1999). An interactive toolkit for structural monitoring. Artificial Intelligence in Structural
Engineering, Wydawnictwa Naukowo-Techniczne, Warsaw, pp 189-198.

Robert Olson, (2005). Knowledge and Technology Transfer in Earthquake Engineering: Consequence-Based
Engineering (CBE) Implementation Opportunities and Challenges. Mid-America Earthquake Center, Newmark Civil
Engineering Lab, University of Illinois at Urbana-Champaign.

FEMA 424: Design Guide for Improving School Safety in Earthquakes, Floods, and High Winds, (2004). Risk
Management Series. U.S. Department of Homeland Security.

FEMA 577: Design Guide for Improving Hospital Safety in Earthquakes, Floods, and High Winds: Providing
Protection to People and Buildings, (2007). Risk Management Series. U.S. Department of Homeland Security.

Pavel Kuklík, (2008). Lusitanian timber framed masonry via FINE Ltd. civil engineering software. Collection WTA
08. CTU in Prague, Faculty of Civil Engineering, Department of mechanics, Czech Republic.

Susan Rutherford, (2006). The Green Buildings Guide - Tools for Local Governments to promote Site
Sustainability. West Coast Environmental Law, The Real Estate Foundation of British Columbia, The Law
Foundation of British Columbia.

Leed- Canada-NC, Version 1.0, (2004). Green Building Rating System - For New Construction & Major
Renovations. LEED, Canada Green Building Coucil.

K.E. Cox, S.A. Ashford, (2002). Characterization of Large Velocity Pulses for Laboratory Testing. PEER Report
2002/22. Pacific Earthquake Engineering Research Center, College of Engineering, University of California,
Berkeley.

U.S. Army Corps of Engineers, (2007). Structural Load Data. Unified Facilities Criteria (UFC), Report No. UFC 3-
310-01.

U.S. Army Corps of Engineers, (2006). Structural Engineering. Unified Facilities Criteria (UFC), Report No. UFC 3-
300-10N.

U.S. Army Corps of Engineers, (2005). Structural Considerations for Metal Roofing. Unified Facilities Criteria
(UFC), Report No. UFC 3-320-03A.

U.S. Army Corps of Engineers, (2005). Metal Building Systems. Unified Facilities Criteria(UFC), Report No. UFC 3-
320-04A.

U.S. Army Corps of Engineers, (2005). Commentary on Snow Loads. Unified Facilities Criteria(UFC), Report No.
UFC 3-330-01A.

U.S. Army Corps of Engineers, (2005). Storage Depots. Unified Facilities Criteria(UFC), Report No. UFC 4-440-01A.

N. Subramanian, (2008). Olympic Structures of China. New Building Materials & Construction World Magazine
(NBM&CW), New Delhi.

M. Ghoreishi, A. Bagech, M.A. Sutlan, (2009). Estimating the Response of Structural Systems to Fire Exposure:
State-Of-The-Art Review. Fire and Materials 2009, 11th International Conference, San Francisco, CA, pp. 474-
483, NRCC-51160.

A. Irfanoglu and C. M. Hoffmann, (2007). An Engineering Perspective of the Collapse of WTC-I. Project website is
at Purdue 9/11/01 studies.

P. Rosen, V. Popescu, C. Hoffmann, A. Irfanoglu, (2007). A High-Quality Physically-Accurate Visualization of the
September 11 Attack on the World Trade Center. Technical Report CSD TR#07-007.

H. Mostafaei, M.A. Sultan, N. Benichou, (2009). Performance of Structural Systems in Fire. International
Conference - Applications of Structural Fire Engineering, Prague, Czech Technical University, pp. 1-6, (NRCC-
50830).

C.V.R. Murty, D.C. Rai, A. Gupta, S.K. Jain, (2004). Introducing Earthquake Engineering in Civil Engineering
Curriculum. The Indian Concrete Journal, pp. 110-116.

J. H. Crandell, and W. Freeborne, (1998). Wind and S eismi c R esearch for I mproved E ngienering C onsensus
S tandards and H ousing C onstruction. NIST SP 931. Wind and Seismic Effects. Proceedings of the 30th Joint
Meeting of the U.S./Japan Cooperative Program in Natural Resources Panel on Wind and Seismic Effects. U.S.
Department of Commerce, Building and Fire Research Laboratory, National Institute of Standards and
Technology.

M. Faber, (2003). Generic Inspection Plans for Steel Structures Subject to Fatigue. Proceedings, Risk-Based
Maintenance of Civil Structures, Delft. Serie Workshop Proceedings No. 8.

A. Der Kiureghian, (2000). The Art and Science of Model Building: A Bayesian Approach. A one-day Workshop on
the Risk-Based Design. Delft University of Technology.

General