Cold Formed Steel Structures

J.A. Wallace, R.M. Schuster, R.A. LaBoube, (2001). Testing of Bolted Cold Formed Steel Connections in Bearing
(With and Without Washers ). Research Report, Canadian Cold Formed Steel Research Group, Department of
Civil Engineering, University of Waterloo, Waterloo, Ontario, Canada.

J.A. Wallace, R.A. LaBoube, R.M. Schuster, (2001). Calibrations of Bolted Cold Formed Steel Connections in
Bearing (With and Without Washers). Research Report, Canadian Cold Formed Steel Research Group,
Department of Civil Engineering, University of Waterloo, Waterloo, Ontario, Canada.

F.M. Tangorra, R.M. Schuster, R.A. LaBoube, (2001). Calibrations of Cold Formed Steel Welded Connections.
Research Report, Canadian Cold Formed Steel Research Group, Department of Civil Engineering, University of
Waterloo, Waterloo, Ontario, Canada.

Schafer B.W., (2006). Designing cold-formed steel using the Direct Strength Method. 8th International
Specialty Conference on Cold-Formed Steel Structures, Orlando, FL. October 2006. Department of Civil
engineering, Johns Hopkins University.

Schafer B.W., Adany S., (2006). Buckling analysis of cold-formed steel members using CUFSM: conventional and
constrained finite strip methods. 8th International Specialty Conference on Cold-Formed Steel Structures,
Orlando, FL. October 2006. Department of Civil engineering, Johns Hopkins University.

Schafer B.W., Pekoz T., (1998). Computational Modeling of Cold-Formed Steel: Characterizing Geometric
Imperfections and Residual Stresses. Journal of Constructional Steel Research, Elsevier Science Ltd. 47(3).
Department of Civil engineering, Johns Hopkins University.

Izumi Iwamoto, Yoshihiro Kimura and Toshiyuki Ogawa, (2000). Tests of Cold-Formed Lipped C-Section
Members Subject to Compression. Proceedings of the 14th Engineering Mechanics Conference, American
Society of Civil Engineers, May 21-24, 2000.

A Builder's Guide to Steel Frame Construction. Available from Steel Framing Alliance (SFA).

A Guide to Fire and Acoustic Data for Cold-Formed Steel Floor and Wall Assemblies, (2006). Available from Steel
Framing Alliance (SFA).

Reynaud Serrette and Khanh Chau, (2003). Estimating the Response of Cold-Formed Steel Frame Shear Walls.
Research Report No. RP03-7. American Iron Steel Institute. Available from Steel Framing Alliance (SFA).

Development of Cost-Effective, Energy Efficient Steel Framing: Structural Performance of Slit-Web Steel Wall
Studs, (2002). Research Report No. RP02-8. American Iron and Steel Institute, U.S. Department of Energy -
Washington D.C., NAHB Research Center Inc. Available from Steel Framing Alliance (SFA).

Galvanized Steel Framing for Residential Buildings, (2006). Research Report No. RP06-1. American Iron and
Steel Institute. NAHB Research Center Inc. Available from Steel Framing Alliance (SFA).

Shabbir Vagh, J.D. Dolan, W.S. Easterling, (2000). Effect of Anchorage and Sheathing Configuration on the
Cyclic Response of Long Steel-Frame Shear Walls. Research Report No. RP00-6. American Iron and Steel
Institute. Available from Steel Framing Alliance (SFA).

Monotonic Tests of Cold-Formed Steel Shear Walls With Openings, (1997). Research Report No. RP97-1.
American Iron and Steel Institute. U.S. Department of Housing and Urban Development. National Association of
Home Builders, NAHB Research Center. Available from Steel Framing Alliance (SFA).

Corrosion of Galvanized Fasteners used in Cold-Formed Steel Framing, (2004). Research Report No. RP04-4.
American Iron and Steel Institute. University of Hawaii at Manoa. Available from Steel Framing Alliance (SFA).
Appendix A of the report.

Hoang Nguyen, Georgi Hall, Reynaud Serrette, (1996). Shear Wall Values for Light Weight Steel Framing.
Research Report No. RP96-1. American Iron and Steel Institute. Available from Steel Framing Alliance (SFA).

Reynaud Serrette, Jose Encalada, Georgi Hall, Brandon Matchen, Hoang Nguyen, Alexander Williams, (1997).
Additional Shear Wall Values for Light Weight Steel Framing. Research Report No. RP97-2. American Iron and
Steel Institute. Available from Steel Framing Alliance (SFA).

Mahmood Md Tahir, Tan Cher Siang and Shek Poi Ngian, (2006). Typical tests on cold-formed steel structures.
Proceedings of the 6th Asia-Pacific Structural Engineering and Construction Conference, 5-6 September 2006,
Kuala Lumpur, Malaysia.

M.T. Mahmood, C.M. Thong, C.S. Tan, (2005). Performance Of Locally Produced Cold-Formed Steel Sections for
Roof Truss System. Jurnal Teknologi B, 42 (B). pp. 11-28.

Maura Lecce & Kim JR. Rasmussen, (2005). Finite Element Modelling and Design of Cold-Formed Stainless Steel
Sections. Research Report No. R845. School of Civil Engineering, The University of Sydney, Australia.

Cao Hung Pham & Gregory J. Hancock, (2007). Direct Strength Design of Cold-Formed Purlins. Research Report
No. R882. School of Civil Engineering, The University of Sydney, Australia.

Derrick C.Y. Yap & Gregory J. Hancock, (2008). Experimental Study of High Strength Cold-Formed Stiffened Web
Steel Sections. Research Report No R889. School of Civil Engineering, The University of Sydney, Australia.

Jurgen Becque, (2008). Part I: The Interaction of Local and Overall Buckling of Cold-Formed Stainless Steel
Columns. Part II. PhD. Thesis, School of Civil Engineering, The University of Sydney, Australia.

Damien Koen, (2008). Structural Capacity of Light Gauge Steel Storage Rack Uprights. Msc Thesis, School of
Civil Engineering, The University of Sydney, Australia.

Cold Formed Steel Structures

simple hit counter

Copyright © 2000-2009 ICICE Disclaimer/Copyrights/Permissions