Structural Analysis & Control

Jerome Connor, (1976). Analysis of Structural Member Systems (Ronald Press).

Shahnam Navaee, Nirmal K. Das, (2002). Utilization of MATLAB in Structural Analysis. Proceedings of the 2002
ASEE/SEFI/TUB Colloquium. American Society for Engineering Education.

Ashraf Ayoub and F.C. Filippou, (2000). Mixed Formulation of Nonlinear Steel-Concrete Composite Beam
Element. Journal of Structural Engineering, American Society of Civil Engineers, Vol. 126, No. 3, pp. 371-381.

Ashraf Ayoub and F.C. Filippou, (1999). Mixed Formulation of Bond-Slip Problems under Cyclic Loads. Journal
of Structural Engineering, American Society of Civil Engineers, Vol. 125, No. 6, pp. 661-671.

A. Neuenhofer and F.C. Filippou, (1997). Evaluation of Nonlinear Frame Finite Element Models. Journal of
Structural Engineering, American Society of Civil Engineers, Vol. 123, No. 7, pp. 958-966.

H.G. Kwak and F.C. Filippou, (1997). Nonlinear Finite Element Analysis of Reinforced Concrete Structures
under Monotonic Loads. Computers and Structures, Vol. 65, No. 1, pp. 1-16. Elsevier Science Ltd. UK.

Spacone E. and El-Tawil S., (2004). Nonlinear Analysis of Syeel Concrete Composite Structures: State of the
Art. Journal of Structural Engineering, ASCE, 130(2), pp. 159-168.

Heidarpour H.R., Foster S.J., (2007). A Novel Flexibility Based Beam-Column Element For Nonlinear Analysis of
Reinforced Concrete Frames. UNICIV Report R-447. School of Civil & Environmental Engineering, The
University of New South Wales, Australia.

Khomwan N., Foster S.J., (2004). Finite element modeling of FRP strengthened beams and walls. UNICIV
Report R-432. School of Civil & Environmental Engineering, The University of New South Wales, Australia.

Attard M.M., (2002). Finite strain beam theory. UNICIV Report R-410. School of Civil & Environmental
Engineering, The University of New South Wales, Australia.

R.V. Lakhote, M.D. Pandey and A.N. Sherbourne, (2000). Buckling Behavior Of Corroded Plates. Proceedings
of the 14th Engineering Mechanics Conference, American Society of Civil Engineers, May 21-24, 2000.

G.D. Hahn and B.P. Champlin, (2000). Stability of Columns Under Combined Lateral and Vertical Loads.
Proceedings of the 14th Engineering Mechanics Conference, American Society of Civil Engineers, May 21-24,
2000.

Joseph Burns, John Abruzzo, Mark Tamaro, (2002). Structural Systems for Progressive Collapse Prevention.
Paper presented at the National Workshop on Prevention of Progressive Collapse, July 10-12, 2002,
Rosemont, Illinois. Available from National Institute of Building Sciences (NIBS).

James R. Cagley, (2002). The Design Professional’s Concerns Regarding Progressive Collapse Design. Paper
presented at the National Workshop on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont,
Illinois. Available from National Institute of Building Sciences (NIBS).

W. Gene Corley, (2002). Applicability of Seismic Design in Mitigating Progressive Collapse. Paper presented at
the National Workshop on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois. Available
from National Institute of Building Sciences (NIBS).

John E. Crawford, (2002). Retrofit Methods to Mitigate Progressive Collapse. Paper presented at the National
Workshop on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois. Available from
National Institute of Building Sciences (NIBS).

Donald O. Dusenberry and Gunjeet Juneja, (2002). Review of Existing Guidelines and Provisions Related to
Progressive Collapse. Paper presented at the National Workshop on Prevention of Progressive Collapse, July
10-12, 2002, Rosemont, Illinois. Available from National Institute of Building Sciences (NIBS).

Bruce R. Ellingwood, (2002). Load and Resistance Factor Criteria for Progressive Collapse Design. Paper
presented at the National Workshop on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont,
Illinois. Available from National Institute of Building Sciences (NIBS).

Ted Krauthammer, Robert L. Hall, Stanley C. Woodson, James T. Baylot, John R. Hayes, Young Sohn, (2002).
Development Of Progressive Collapse Analysis Procedure And Condition Assessment For Structures. Paper
presented at the National Workshop on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont,
Illinois. Available from National Institute of Building Sciences (NIBS).

D. B. Moore, (2002). The UK and European Regulations for Accidental Actions. Paper presented at the
National Workshop on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois. Available
from National Institute of Building Sciences (NIBS).

David Scott, Barbara Lane, Craig Gibbons, (2002). Fire Induced Progressive Collapse. Paper presented at the
National Workshop on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois. Available
from National Institute of Building Sciences (NIBS).

Robert Smilowitz, (2002). Analytical Tools for Progressive Collapse Analysis. Paper presented at the National
Workshop on Prevention of Progressive Collapse, July 10-12, 2002, Rosemont, Illinois. Available from
National Institute of Building Sciences (NIBS).

Mahoney Erin Elizabeth, (2007). Analyzing the effects of blast loads on bridges using probability, structural
analysis, and performance criteria. Msc Thesis, Department of Civil Engineering, University of Maryland.

C. Li and R. Borja, (2005). Finite Element Formulation of Poro-Elasticity Suitable for Large Deformation
Dynamic Analysis. Report TR147. The John A. Blume Earthquake Engineering Center. Department of Civil and
Environmental Engineering Stanford University.

Chao-Hua Lin and R.I. Borja, (2000). Dynamic Theory of Mixtures and Its Finite Element Implementation for
Nonlinear Analysis of Ground Motion Induced by Seismic Shaking. Report TR137. The John A. Blume
Earthquake Engineering Center. Department of Civil and Environmental Engineering Stanford University.

Helen Crowley and Rui Pinho, (2006). Simplified Equations for Estimating the Period of Vibration of Existing
Buildings. First European Conference on Earthquake Engineering and Seismology, Geneva, Switzerland,
Paper No. 1122.

A. Afshar, A. Kaveh, O.R. Shoghli, (2007). Multi-Objective Optimization of Time-Cost-Quality Using Multi-Colony
Ant Algorithm. Asian Journal of Civil Engineering (Building and Housing), Vol. 8, No.2, pp. 113-124.

M.M. Gram, A.J. Clark, G.A. Hegemier, F. Seible, (2006). Laboratory simulation of blast loading on building and
bridge structures. Dtructures under Shock and Impact IX. WIT Transactions on The Build Environment, Vol 87,
WIT Press.

A. Kaveh, (2006). Advances in Computational Mechanics Via Graph Theory. Asian Journal of Civil Engineering
(Building and Housing), VOL. 7, NO. 4, Pages 393-410.

A. Kaveh, and B. Dadfar, (2008). Optimum Seismic Design of Steel Moment Resisting Frames by Genetic
Algorithms. Asian Journal of Civil Engineering (Building and Housing) Vol. 9, No.2, pages 107-129.

A. Kaveh, M. Jahanshahi, and M. Khanzadi, (2008). Plastic Analysis of Frames Using Genetic and Ant Colony
Algorithms. Asian Journal of Civil Engineering (Building and Housing) Vol. 9, No. 3, Pages 229-249.

Jian Zhao, (2007). Modeling of Strain Penetration Effects in Fiber-Based Analysis of Reinforced Concrete
Structures. ACI Structural Journal.

R. Eligehausen, J. Ozbolt, G. Genesio, M.S. Hoehler, and S. Pampanin, (2006). Three-Dimensional Modelling of
Poorly Detailed RC Frame Joints. Proceedings of the Annual NZSEE Conference, Napier, paper No. 23.

H. Moghaddam, and I. Hajirasouliha, (2004). A New Approach for Optimum Design of Structures Under
Dynamic Exciation. Asian Journal of Civil Engineering (Building and Housing) Vol. 5, Nos. 1–2, pages 69-84.

K. Palacio, P.B. Lourenco, and J. Barros, (2003). Numerical Modeling of Single Shell Roofs. Report 03-DEC/E-
21. Universidade do Minho.

M.K.A. Shaalan, (1998). Continuum Damage Model for Compressive Fatigue of High Strength Concrete. Msc
Thesis, King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia.

Carsten Ahner and Nguyen Viet Tue, (1997). A New Safety Format for the Design of Reinforced Concrete
Structures with Non-Linear Behaviour of Materials. LACER, No. 2, pp. 317- 334.

Thorsten Faust, (1997). Stress Strain Curves of High Strength Lightweight Concrete. LACER, No. 2, pp. 103-
108.

A. Kaveh, P. Sharafi, (2007). A Simple Ant Algorithm for Profile Optimization of Sparse Matrices. Asian Journal
of Civil Engineering (Building and Housing), Vol. 9, No. 1, pages 35- 46.

D. Duthinh, K.B. McGrattan, A. Khaskia, (2007). Recent Advances in Fire-Structure Analysis. Technical
Memorandum of PWRI 4075; Wind and Seismic Effects. U.S./Japan Natural Resources Development Program
(UJNR). Joint Meeting, 39th. Proceedings, Tsukuba, Japan, pp. 310-319.

Structural Analysis & Control

Copyright © 2000-2009 ICICE Disclaimer/Copyrights/PermissionsWIT

simple hit counter